RCD ve Çevrim Testi ile MPCC230 Devre Kontrol Cihazı
MPCC230, elektrik tesisatlarını doğrulamak için kullanılan çok işlevli, cep boy bir devre kontrol cihazıdır. RCD, çevrim empedansı ve temas gerilimi gibi çeşitli güvenlik testlerini gerçekleştirmenize olanak sağlayan bir TRMS multimetre ve soket kontrol cihazı görevi görür. Cihazda 1,77 inç TFT ekran, raporlar için dahili bellek ve bağlantı kesildiğinde bile güç için supercap bulunur. Konutsal ve ticari ortamlarda elektrik sistemlerini test etmek için ideal olan bu ürün, IEC61557-3 ve IEC61557-6 standartlarına uyumluluk sağlar.
The MPCC230 does not turn on
The MPCC230 uses supercap technologies. This means that the unit needs power to charge up the supercap when its is depleted. If there is no mains supply to the unit its unable to charge the supercap. Check the supply to the socket is present (190 – 253 V AC), if so leave connected to the circuit for 5 to 10 second to allow the supercap to charge up and power the device.
The display is dim, loop measurement
During the LOOP measurement, if the supercap is not fully charged, the display may switch off or decrease the intensity, however the measurement will be performed and shown at the end of test.
I am not getting accurate measurements.
The MPCC230 is intended to be a quick and easy checker. Disturbance or noise on the circuit can cause varying results. If unsure more advance testing should be performed on the circuit with the MFT-X1.
Ürünü sepetinize ekleme